| 工程洗车机优点分析（2） |
| 添加时间：2019/8/17 11:59:52 浏览次数： |
| 新型排出洗车淤泥的方法 New method of discharging car washing sludge 通常工程洗车机排除洗车淤泥的方法是采用刮泥机将淤泥刮出，这种方法在实际使用中根本刮不出淤泥，相反刮泥机在水池中起到了搅拌机的作用，把沉淀的淤泥都搅起来，使水池本来浑浊的水变成了泥浆水，大大降低了洗车效果。通过研究人们改变原除泥方法，现采用泥浆泵排除淤泥。改变了原来的状况，大大的提高了水的循环利用率。 Usually, the method of removing the sediment from car washer is to scrape the sediment out with a scraper. This method can not scrape the sediment out at all in practical use. On the contrary, the scraper plays the role of a mixer in the pool, stirring up the sediment, turning the turbid water into slurry water, greatly reducing the car washer. Effect. Through the study of people changing the original method of sludge removal, slurry pump is now used to remove sludge. The original situation has been changed and the water recycling efficiency has been greatly improved. 造价低，转场运输安装方便 Low Cost, Convenient Transportation and Installation 现有洗车机采用的是钢构形式即：洗车机和基础是钢构一体的。这样的洗车机长期使用后存在很大问题，其一由于基础整天浸泡在水中锈蚀严重，长期使用很难保证安全。其二将来转场费工费时及不方便。然而有的超长洗车机采用混凝土基础，降低了购物成本的同时也大大增加了洗车机使用中的安全性和可靠性。洗车机为分体式，可分块拆卸安装，为将来转场提供了方便。 The existing car washer adopts the form of steel structure, that is, the car washer and the foundation are integrated with steel structure. This kind of car washer has a lot of problems after long-term use. First, it is difficult to ensure safety for long-term use because of the serious corrosion of the foundation soaked in water all day. Secondly, it will be time-consuming and inconvenient to transfer in the future. However, some super-long car washers use concrete foundation, which reduces the cost of shopping and greatly increases the safety and reliability of car washers. The car washer is split and can be disassembled and installed in blocks, which provides convenience for future transfer. |
| 上一页 电脑洗车机 |
| 下一页 工程洗车机 优点分析 |
Copyright © 技术支持：遨游网络