工程洗车机 优点分析 |
添加时间:2019/8/8 8:42:52 浏览次数: |
优点分析 Advantage analysis 车辆快速脱水 Vehicle rapid dewatering 因为车辆通过洗车机冲洗完后需马上上路,这样冲洗完后的车辆就可能把泥水带出工地造成污染,为解决这一问题,人们在洗车机上设计了一套快速脱水功能,使冲洗完后的车辆在出工地上路前基本达到无水滴,流水现象。减少了对路面的污染。 Because the vehicles need to go on the road immediately after washing, so the vehicles after washing may bring mud out of the construction site and cause pollution. In order to solve this problem, people designed a set of quick dehydration function on the car washer, so that the vehicles after washing basically achieve no water droplets and flow before leaving the construction site. It reduces the pollution to the road surface. 分段冲洗节约用水 Sectional flushing to save water 一般情况下洗车机冲洗时整台洗车机都是同时喷水,由于洗车机超长,在洗车的过程中车辆需缓慢行进洗车机前部分喷的水喷不到车上,造成浪费。为此采取分段喷水控制,这样首先解决了能源浪费问题,同时有可减小蓄水池降低使用成本。 Generally, the whole washing machine sprays water at the same time when washing the car. Because the washing machine is too long, the water sprayed from the front part of the car washing machine needs to travel slowly in the process of washing the car, which causes waste. In order to solve the problem of energy waste, the subsection sprinkler control is adopted. At the same time, the storage tank can be reduced and the use cost can be reduced. 水循环使用 Water recycling 洗车机冲洗用水设有专用水池,设计为清水池和沉淀池保证水的循环利用。 The washing water of the car washer is equipped with a special water tank, which is designed as a clear water tank and a sedimentation tank to ensure the recycling of water. |
上一页 工程洗车机优点分析(2) |
下一页 洗车市场 |
Copyright © 技术支持:遨游网络