江苏泰州空压机匠心厂

Washing machine in coal mine, engineering, construction, concrete mixing stations, large freight station and other places of installation and use, greatly reducing all kinds of engineering vehicle with dust mud on the road. The project washing machine also plays an irreplaceable role in environmental protection. What should be noticed in the use and maintenance of the engineering washing machine in winter?

◆管路排空◆

The pipeline emptying it

寒冷天气要按照操作说明采取相应的措施预防冻结，工程洗轮机长时间闲置或冬季的夜晚，要放空水管和水泵中的积水，防止结冰。 日森工程洗车机分为自动排空和手动排空两种。可按说明书进行相应操作。

In cold weather, we should take corresponding measures to prevent freezing in accordance with the operation instructions. We should drain the water in the pipes and water pumps and prevent icing when they are idle for a long time or on winter nights. Himori engineering washing machine is divided into two kinds of manual and automatic emptying emptying. It can be operated according to the instructions.

◆水源防冻◆

The water / antifreeze

注意储水箱/池的防冻工作，保证水源不结冰也是工程洗车机在低温下继续使用的重要一点。

It is important to pay attention to the anti freezing work of the tank and tank, to ensure that the water source is not frozen, and it is also an important point for the engineering car washing machine to continue to use at low temperature.

当下北方已进入严冬，看河北矿区的日森重型工程洗车机照常使用，透过视频，随意感受一下，这巨大的清洗威力！

The North has entered the winter, see the day of heavy engineering washing machine in Hebei mining area is used as usual, through video, feel free to look at, this huge cleaning power!

◆定期清理◆

The regular cleaning of the

定期清理沉淀池内的污泥，以免混流到清水池中导致堵塞喷头。

Clean up the sludge in the sedimentation tank regularly so as not to mix the sludge into a clear water pool and cause the plugging of the nozzle.

◆保持卫生◆

We keep the health

做好工程洗轮机表面的清洁与卫生工作。

Do a good job of cleaning and sanitary work on the surface of the engineering washing machine.

◆定时检查◆

We regularly check it

经常检查喷头及喷孔有无堵塞，以免影响清洗效果。

Always check the spray nozzle and the spray hole without clogging, so as not to affect the cleaning effect.

◆小提示：在进行任何清洁和保养时，都应先切断电源，以保证作业安全。

The tip: in any cleaning and maintenance, should first cut off the power supply, to ensure safe operation.