返回首页

江苏泰州空压机匠心厂

本站导航

新闻动态

当前位置:网站首页 > 新闻动态 > 详细信息
工程洗车机
添加时间:2018/1/2 13:56:34     浏览次数:
工程洗车机是新兴的洗车设备,采用全自动的操作方式,可做到供水、清洗、排泥的工作
The project washing machine is a newly developed car washing equipment. It can be used in all automatic operation ways. It can do the work of water supply, cleaning and sludge discharge.
工程洗车机是一种实现了各类工程车辆的自动冲洗,彻底解决了城市建筑工地车辆外出对道路污染的难题的洗车设备。适用于建筑工地、垃圾处理场、采石场、货物转运场等能对道路产生污染的场所。市面上的各种工程洗车机是在研发,质量还有价格上都参差不齐。
The engineering car washing machine is a vehicle washing machine that realizes the automatic washing of all kinds of engineering vehicles, and completely solves the problem of vehicle washing on urban construction sites. It is suitable for building sites, garbage disposal sites, quarries, freight transport fields and other places that can pollute the road. All kinds of Engineering washing machines on the market are in research and development, quality and price are uneven.
车辆快速脱水
Fast dewatering of vehicles
因为车辆通过洗车机冲洗完后需马上上路,这样冲洗完后的车辆就可能把泥水带出工地造成污染,为解决这一问题,人们在洗车机上设计了一套快速脱水功能,使冲洗完后的车辆在出工地上路前基本达到无水滴,流水现象。减少了对路面的污染。
Because the vehicle through the washing machine after washing to get on the road, so after washing the vehicle can bring out the mud pollution site, in order to solve this problem, people design a rapid dehydration function in the washing machine, so after washing the vehicle in the road from the site of water droplets. The phenomenon of. The pollution of the road has been reduced.
分段冲洗节约用水
Subsection irrigation and water saving
一般情况下洗车机冲洗时整台洗车机都是同时喷水,由于洗车机超长,在洗车的过程中车辆需缓慢行进洗车机前部分喷的水喷不到车上,造成浪费。为此采取分段喷水控制,这样首先解决了能源浪费问题,同时又可减小蓄水池降低使用成本。
In general, when the car washing machine is washing, the whole car washing machine is spraying at the same time. Because the car washing machine is too long, the vehicle needs to move slowly in the process of car washing, and the water partially sprayed before washing the car will not get to the car, causing waste. In this way, the water jet control is adopted, which first solves the problem of energy waste and reduces the cost of the storage tank to reduce the use.
水循环使用
Water recycling
洗车机冲洗用水设有专用水池,设计为清水池和沉淀池保证水的循环利用。
The washing water of the washing machine is equipped with a special pool, which is designed for the clean water tank and the sedimentation tank to ensure the recycling of water.
新型排出洗车淤泥的方法
A new method of removing sludge from car washing
通常工程洗车机排除洗车淤泥的方法是采用刮泥机将淤泥刮出,这种方法在实际使用中根本刮不出淤泥,相反刮泥机在水池中起到了搅拌机的作用,把沉淀的淤泥都搅起来,使水池本来浑浊的水变成了泥浆水,大大降低了洗车效果。通过研究人们改变原除泥方法,现采用泥浆泵排除淤泥。改变了原来的状况,大大的提高了水的循环利用率。
Washing machine washing method engineering usually excludes the silt is the mud scraper to scrape the silt, this method in the actual use of basic scraping mud, mud scraper in the pool opposite to the mixer role, the precipitation of the silt stirred up, the pool was muddy water into mud water. Greatly reduces the cleaning effect. By studying the method of changing the original mud removal, mud pump is used to remove mud. The original condition has been changed and the recycling rate of water has been greatly improved.
上一页  工程洗车机  
下一页  工程洗车机冬季使用注意事项
  • 关于我们
  • 新闻动态
  • 案例展示
  • 网上订单
  • 联系我们
  • 产品分类1
  • 产品分类2
  • 产品分类3

Copyright © 技术支持:遨游网络

  • 联系我们
  • 网上订单
  • 工程案例
  • 本站导航

搜索

  • 关于我们
  • 新闻动态
  • 案例展示
  • 网上订单
  • 联系我们
  • 产品分类1
  • 产品分类2
  • 产品分类3