网站转让 → 您的公司名称

洗车机保养和故障处理

Car Washer Maintenance and Troubleshooting

为了提高的经济性电脑洗车场猛烈决定延长寿命的使用高明的日常生活中保守经营管理等蒂几点建议华新顾客值得参考的事情。

In order to improve the economy of computer car wash, some suggestions for Huaxin customers are put forward, such as the fierce decision to prolong the life of the car wash, the conservative management in the wise daily life.

第一,每天检查、维护项目。

First, check and maintain projects every day.

1、开拍后空压排的水,受到压力的检查。

1. Water discharged by air pressure after shooting is checked by pressure.

2 、检查各传感器。

2. Check the sensors.

3、检察官蜡用水及清洁剂桶内位液。

3. Inside water for wax and detergent barrel for prosecutors.

4、输送带内部整理及异物进行了检查。

4. Internal arrangement of conveyor belt and foreign body inspection were carried out.

5、确保水源电源和正常运转,无事故隐患。

5. Ensure the normal operation of water source power supply and no potential accident.

6、卡打扫卫生检查。

6. Card cleaning and hygiene inspection.

7、外观设备维持与洁机内整洁。

7. Maintain the appearance equipment and clean the inside of the machine.

8、场内清洁物品摆设产生了作用。

8. Clean goods in the yard have played a role.

7

Seven

洗车机故障处理

Troubleshooting of Car Washer

1.洗车机出现泡沫喷洒不均匀，很可能就是泡沫系统出现故障,重点检查：洗车机的气压过小或者过大，可以尝试调节气压的调节装置。

1. car washing machine foam spray uneven, it is likely that the bubble system failure, check: car washing machine too small or too large, you can try to adjust the pressure regulator.

2.出现洗车液的配比度可能出现异常，可以对洗车液的配比进行调整。

2. The ratio of car wash fluid may be abnormal, so the ratio of car wash fluid can be adjusted.

3.如果泡沫管道出现了渗漏或者泄露，请检查管道是否牢固和松脱。

3. if there is leakage or leakage in the foam pipe, check whether the pipe is firm and loose.

4.洗车机的喷头停止转动，检查和清理喷嘴是否有堵塞，更换损坏的旋转器；喷嘴的角度调节适当即可。

4. The sprinkler of the car washer stops turning, checks and clears whether the nozzle is blocked, replaces the damaged rotator, and adjusts the angle of the nozzle appropriately.

5.水泵出现异常的声音，有可能吸入了空气，要立即检查水箱是否有水，清理滤网，防止堵塞

5. The abnormal sound of the water pump may inhale air. It is necessary to check the water tank immediately and clean the filter to prevent blockage.

6.如果水泵的高压水压力过低，调整阀门的压力，皮带松紧度，检查活门是否需要更换。

6. If the high pressure water pressure of the pump is too low, adjust the pressure of the valve, belt tightness, check whether the valve needs to be replaced.